Compacta - Compa

Now Compa presents a new product, which uses the tradition obtained in the field of wood-working machines, and in particular, of combined machines.
COMPACTA is a combined machine with 2, 3 and6 working processes, which
represents the ideal choice for the most demanding hobbyist, as it combines the highest performances with the most functional practicality.

Available version:
COMPACTA 260/2 (tooling operations 1 and 2) _ COMPACTA 260/3 (tooling operations 1,2 end 3)
COMPACTA 260/5 (tooling operations 1,2,4,5 and 6) _ COMPACTA 260/6 (all tooling operations)

Planer thickness tables and saw table made of aluminium treated with a chemical anti-scratch hardening.
Equipped with three motors that can be operated separately to grant the ideal power for each specific tooling operation.
Adjustable scorer in the standard supply, allowing a perfect cut also on faced panels.
Squaring and tenoning trolley in the standard supply. Planer shaft fitted with 3 shaped knives to achieve an optimal planarity
both in the roughing and in the finishing work. Maximum removal of 4 mm in the surfacing and in the thickness planing.
The steel base makes its transport easy without affecting the stability and sturdiness required by the user.
Its limited weight and overall dimensions (maximum width of 80 cm to allow for its passage through standard doors)
increase the easiness of its transport and use also in limited spaces.

Working width 260 mm. The planer bases are made of extruded
aluminium treated with a chemical anti-scratch hardening.
The shaft is fitted with 3 knives.

Height adjustable from 3 mm to 200 mm by means of a handwheel.
The planer thickness base is made of extruded aluminium treated with a
chemical anti-wear hardening.

Fitted with a support base of 180x370 mm that can carry out a transversal, a
longitudinal or a vertical stroke. The stroke length is 100 mm in all three cases.
OPTIONAL

The base is made of cast aluminium treated with a chemical
anti-scratch hardening. The saw blade is adjustable in height and tilting up to 45°.

For an optimal tooling reliability, the spindle moulder is adjusted by
means of a handwheel, allowing a stroke of 120 mm.

The trolley with a lateral support slides on steel guides,
allowing a high precision reliability and a great resistance to wear.